2011 All Fix

MIXING:

• Add 3 3.5 parts of powder to 1 part of water or 4-5 litre water for 20 Kg powder in a clean mixing vessel.
• Adjust the water as per desired consistency.
• Mix with a suitable mechanical stirrer or slow speed drills (50-100 rpm) until a lump free homogeneous paste is obtained.
• Always mix required quantity, which can be consumed within pot life.
• Leave mixture for 5 minutes before use.
• No further water should be added.

SUBSTRATE PREPARATION:

• The substrate must be leveled, cured, undamaged, compact. rigid, resistant, dry and free from any debonding agents and from damp rising.
• All surfaces must be plumb and true to within 6 mm in10 ft (3m).
• Dry, dusty surfaces should be dampened with water & excess water should be swept off.
• New concrete slabs shall be damp cured and 28 days old before application which will reduce the shrinkage from tile fixing surface.
• Expansion joints to be provided & filled with suitable sealant.
• Do not cover expansion joints with thin set tile adhesive/tile

COVERAGE:

• Approx. 5-6 m²/ 20 kg Bag at 3 mm thickness (using 6 mm x 6 mm notch).
• Approx. 7,5-8 m²/ 30 kg Bag at 3 mm thickness using 6 mm x 6 mm notch).
• Approx. 1.2 kg/m² per mm of thickness.

*Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness

DESCRIPTION:

• Highly polymer-modified
• Thicknesses up to 10 mm
• For internal floor & wall and external floor only.
• For balconies and terraces
• No sag
• Prolonged workability
• Adjustable
• Sustains heat ageing
• For fixing stones.
• Suitable for full body vitrified tiles

PACKAGING

• Grey 20 kg & 40 kg bag
• White 20 kg & 40 kg bag