Description
MIXING:
- Add 3 3,5 parts of powder to 1 part of water or 4-5 litre water for 20 Kg powder in a clean mixing vessel.
- Adjust the water as per desired consistency.
- Mix with a suitable mechanical stirrer or slow speed drills (50-100 rpm) until a lump free homogeneous paste is obtained.
- Always mix required quantity, which can be consumed within pot life.
- Leave mixture for 5 minutes before use.
- No further water should be added.
COVERAGE:
- Approx. 5-6 m²/ 20 kg Bag at 3 mm thickness (using 6 mm x 6 mm notch).
- Approx. 7.5-8 m²/ 30 kg Bag at 3 mm thickness using 6 mm x 6 mm notch).
- Approx. 1.2 kg/m² per mm of thickness.
- *Coverage will vary depending on trowel notch size, type, size of tile and substrate smoothness and evenness.
SUBSTRATE PREPARATION:
- The substrate must be leveled, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising.
- All surfaces must be plumb and true to within 6 mm in10 ft (3m).
- Dry, dusty surfaces should be dampened with water & excess water should be swept off.
- New concrete slabs shall be damp cured and 28 days old before application which will reduce the shrinkage from tile fixing surface. Expansion joints to be provided & filled with suitable sealant.
- Do not cover expansion joints with thin set tile adhesive/tile
DECRIPTION:
- Polymer-modified.
- Thicknesses up to 10 mm.
- For internal floor & wall only.
- No sag.
- Prolonged workability.
- Suitable for clay, ceramic tiles.
- Dry area applications only.
PACKAGING:
- Grey 20 kg
Reviews
There are no reviews yet.