Description
SURFACE PREPERATION
- The surface of application must be thoroughly prepared by mechanical means, to remove all loose particles, laitance, etc.
- Oil and grease, if any, must be de-greased with suitable solvents. It then must be washed off with jet of water and brought to touch dry state.
MIXING
- Shake the liquid component well to a homogenous milky colour.
- Use heavy duty slow speed mechanical mixer fitted with a suitable paddle for mixing the two components of the material.
- In a mixing vessel, slowly add the powder component in to the liquid under continuous stirring. Continue to stir thoroughly to achieve a lump free homogenous slurry.
FEATURES:
- Elastomeric elastomeric flexible coating that accommodate cracks up to 2 mm with an elasticity of 40-50%
- Low water permeability excellent resistance to ingress of water
- Adhesion excellent adhesion to concrete and masonry surfaces.
- Eco-friendly Non-toxic with low VOC content
PRECAUTIONS & LIMITATIONS
- Do not part mix. Mix the entire quantity of both the components at one go.
- Do not dilute.
- Always add powder to liquid to avoid lump formation.
- Do not flood or aver expose the treated surface to water until it is completely cured.
SHELF LIFE & STORAGE
- Shelf life is 12 months from the date of manufacturing.
- Store in shed, protecting from direct sunlight and away from extreme temperature.
- In extremely hot temperature conditioris, store in a temperature-controlled environment i.e. less than 30C
Reviews
There are no reviews yet.